Payntoxy

Surface Preparation

Prior application of PAYNTOXY :

New surface: Surface generally must be clean, dry and free of all loose, dirt, oil stain and other contaminants before paint application. Surface affected by rust must be thoroughly cleaned and primed with Heavy Duty MP Primer or Payntoxy 134 Primer before finishing coat.

Painted surface: For a strong preceding coat, light sanding  is recommended. Then the surface must be thoroughly cleaned, dried and free of all loose, dirt, dust, oil stain and other contaminants before paint application.

Safety, Health and Environment

During painting, make sure no source of ignition at surrounding and no smoking. Always remember to use protective equipment especially eye-goggles and a face mask to cover the mouth and nose. Remember to ensure adequate ventilation in rooms you are painting – open windows and doors wherever possible. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. When not in use, store paint in cool and shaded place and do not directly expose sunlight. Do not dispose paint into drains or watercourses. Wash your hands after use.

Refer to PAYNT Technical Data Sheet (TDS) for further details. - click button for pdf

Safety Data Sheet (SDS) is available upon request.